DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
843
DGS-3000-26TC:admin#create trusted_host 10.48.74.121
Command: create trusted_host 10.48.74.121
Success.
delete trusted_host 91-2
Description
This command is used to delete a trusted host entry made using the create trusted_host command
above.
Format
delete trusted_host [ipaddr <ipaddr> | ipv6address <ipv6addr> | network
<network_address> | ipv6_prefix <ipv6networkaddr > | all]
Parameters
ipaddr - The IP address of the trusted host.
<ipaddr> - Enter the IP address used for this configuration here.
ipv6addr - The IPv6 address of the trusted host.
<ipv6addr> - Enter the IPv6 address used for this configuration here.
network - The network address of the trusted network.
<network_address> - Enter the network address used for this configuration here.
ipv6_prefix - The IPv6 subnet prefix of the trusted network.
<ipv6networkaddr> - Enter the IPv6 subnet prefix here.
all - All trusted hosts will be deleted.
Restrictions
Only Administrators and Operators can issue this command.
Example
To delete the trusted host:
DGS-3000-26TC:admin#delete trusted_host ipaddr 10.48.74.121
Command: delete trusted_host ipaddr 10.48.74.121
Success.
config trusted_host 91-3
Description
This command is used to configure the access interfaces for the trusted host.
To Next Page
Loading...
