D-Link DGS-3000

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
862
DGS-3000-26TC:admin#show voice_vlan ports 1-5
Command: show voice_vlan ports 1-5
Ports Status Mode
----- --------- --------------
1 Disabled Auto Untagged
2 Disabled Auto Untagged
3 Disabled Auto Untagged
4 Enabled Auto Untagged
5 Enabled Auto Untagged
DGS-3000-26TC:admin#
show voice_vlan voice_device 94-11
Description
This command is used to show voice devices that are connected to the ports. The start time is the
time when the device is detected on this port and the activate time is the latest time the device
sent traffic.
Format
show voice_vlan voice_device {ports <portlist>}
Parameters
ports - (Optional) Specify the list of ports to be configured here.
<portlist> - Enter a list of ports used to be displayed here.
Restrictions
None.
Example
To display the voice devices that are connected to the ports 1-5: