D-Link DGS-3000 - Page 884

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
880
Format
config wac trap state [enable | disable]
Parameters
enable - Specify to enable the WAC trap state.
disable - Specify to disable the WAC trap state.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
This example show how to enable the WAC trap state.
DGS-3000-26TC:admin# config wac trap state enable
Command: config wac trap state enable
Success.
DGS-3000-26TC:admin#