3: agentGratuitousARPPortNumber
4: agentGratuitousARPInterfaceName
agentCfgOperCompleteT
rap
The trap is sent when the configuration is completely saved,
uploaded or downloaded.
Binding:
1: unitID
2: agentCfgOperate
3: agentLoginUserName
1.3.6.1.4.1.171.12.1.7.2.
0.9
agentFirmwareUpgrade
This trap is sent when the process of upgrading the firmware via
SNMP has finished.
Binding: 1: swMultiImageVersion
1.3.6.1.4.1.171.12.1.7.2.
0.7
swPowerStatusChg
Power Status change notification. The notification is issued when
the swPowerStatus changes in the following cases:
lowVoltage -> overCurrent.
lowVoltage -> working.
lowVoltage -> disconnect.
lowVoltage -> connect.
overCurrent -> lowVoltage.
overCurrent -> working.
overCurrent -> disconnect.
overCurrent -> connect.
working -> lowVoltage.
working -> overCurrent.
working -> connect.
working -> disconnect.
fail -> connect.
fail -> disconnect.
connect -> lowVoltage.
connect -> overCurrent.
connect -> working.
connect -> disconnect.
disconnect -> lowVoltage.
disconnect -> overCurrent.
disconnect -> working.
disconnect -> connect.
Binding:
1: swPowerUnitIndex
2: swPowerID
3: swPowerStatus
1.3.6.1.4.1.171.12.11.2.
2.2.0.1
swPowerFailure
Power Failure notification. The notification is issued when the
swPowerStatus changes in the following cases:
lowVoltage -> fail.
overcurrent -> fail.
working -> fail.
connect -> fail.
disconnect -> fail.
Binding:
1: swPowerUnitIndex
2: swPowerID
3: swPowerStatus
1.3.6.1.4.1.171.12.11.2.
2.2.0.2
swPowerRecover
Power Recover notification. The notification is issued when the
swPowerStatus changes in the following cases:
Binding:
1: swPowerUnitIndex
2: swPowerID
3: swPowerStatus
1.3.6.1.4.1.171.12.11.2.
2.2.0.3
swFanFailure
Fan Failure notification.
Binding:
1: swFanUnitIndex
2: swFanID
1.3.6.1.4.1.171.12.11.2.
2.3.0.1
swFanRecover
Fan Recover notification.
Binding:
To Next Page
Loading...
