SV-MAP-270 Navigation Mapping License Purchase and Setup
6-2 SkyView System Installation Guide - Revision AA
LICENSED DISPLAY OFFLINE - XX HOURS REMAIN The SkyView system is licensed to use the
Navigation Mapping License. However, the display that actually stores the license
information is not currently connected. When this happens, the Navigation Mapping
License will continue to operate for 30 flight hours beyond when it last saw the licensed
display in the aircraft. Once the licensed display is seen again, this timer is cleared.
NO LICENSE: No display in the SkyView system is licensed to use the Navigation Mapping
License.
Features Overview
Once licensed, the following features are enabled as long as SkyView has a valid GPS position
signal, the appropriate high resolution terrain database installed for the region of the world
that you are flying in, and aviation database installed.
Use of MAP menu and features, including:
o Display of airport, airspace, obstacles, traffic, and other aviation data that is
available (capabilities depend on available databases and other installed
equipment).
o Display of procedure charts, airport diagrams, enroute charts (sectionals), and other
layers that can be overlaid on the map.
o Display of basemap features, including roads, city names, railroads, rivers, and
political boundaries.
o All Navigation Mapping features available via the MAP menu.
o Display of obstacles and runways on Synthetic Vision (if Synthetic Vision is licensed).
o All future updates to the SV-MAP-270 Navigation Mapping License.
Purchasing and Installing a SV-MAP-270 Navigation Mapping License
A license can be purchased and applied to your system in one of two ways:
1. Call Dynon Avionics directly at 425-402-0433 with your SkyView Classic display model (SV-
D700, SV-D1000, or SV-D1000T) and serial number (as displayed on the case sticker, or in
SETUP MENU > LOCAL DISPLAY SETUP > DISPLAY HARDWARE INFORMATION). An SV-MAP-
270 Navigation Mapping License Code can be purchased for the entire aircraft you wish to
enable the Navigation Mapping License on. This six-character License Code is then entered
in SETUP MENU > LOCAL DISPLAY SETUP > LICENSE > LICENSE CODE. If you have more than
one display in the aircraft, choose one to install it onto and provide information for only
that display. Once any display is licensed, all connected displays in the Aircraft can use the
Navigation Mapping License.
2. An SV-MAP-270 SkyView Navigation Mapping License Certificate may be purchased from
Dynon Avionics or any authorized Dynon Avionics dealer. This certificate can be redeemed
for a license code that can be entered in SETUP MENU > LOCAL DISPLAY SETUP > LICENSE >
LICENSE CODE. To redeem a certificate simply follow the instructions on the certificate
To Next Page
Loading...
