SkyView System Installation Guide - Revision AA 20-1
20. SV-MAG-236 Installation and Configuration
Figure 200 – SV-MAG-236 (Photo)
The SV-MAG-236 Remote Magnetometer was developed for situations where the SV-ADAHRS-
200/201’s integrated magnetometer cannot be located in an area free of magnetic disturbances
while satisfying the other installation constraints (such as proximity to center of gravity) of the
SV-ADAHRS-200/201. The SV-MAG-236 is particularly recommended for steel-frame aircraft.
Figure 201 – SV-MAG-236 (Drawing)
To minimize the possibility of magnetic interference from the connector assembly, the SV-
MAG-236 uses an 18-inch integral cable – the connector is remoted from the magnetometer
sensor.
A maximum of one SV-MAG-236 can be used in a SkyView system.
To Next Page
Loading...
