SkyView System Installation Guide - Revision AA 10-1
10. AP Servo Installation, Configuration, and Calibration
Figure 104 – SV42 Servo (other servos are similar)
This section contains generic mechanical and electrical installation guidelines for the Dynon
Avionics servos mentioned in Table 73. Plane-specific kits purchased from Dynon Avionics
contain detailed drawings and diagrams which are intended to be used in conjunction with this
guide as a complete set of installation instructions. A complete list of aircraft mounting kits is
available on the current Price List/Order Form at http://store.dynonavionics.com. Drawings and
diagrams are also available at http://docs.dynonavionics.com.
Figure 105 is a high-level overview of a suggested servo installation, configuration, and
calibration procedure.
To Next Page
Loading...
