Introduction
1-2 SkyView System Installation Guide - Revision AA
* Not applicable to a SkyView SE system
** SV-AP-PANEL buttons not applicable to a SkyView SE system (trim control subsystem does
function in a SkyView SE system.)
The following (optional) units have their own Installation and/or Operating manuals, also
available at http://docs.dynonavionics.com:
Dynon Avionics AOA/Pitot Probes
SV-INTERCOM-2S
SV32, SV42, and SV52 (all variants) installation kits for specific aircraft
This guide deals with setting up installation-dependent Software options. Because you may not
have purchased all of the components mentioned above, you need only read through the
relevant sections of this guide
When a SkyView system is connected to products not manufactured or provided by Dynon
Avionics (such as NAV radios and GPS receivers), it is often necessary to refer to those product’s
technical / installation manuals to configure their settings and their wiring to be compatible
with your SkyView system. While this guide provides some information about some popular
products not manufactured by Dynon Avionics, the information provided in this guide is not
comprehensive. Thus, for any third-party products that you intend to connect to your SkyView
system, we recommend that the installer obtain the full technical / installation manuals
available for reference.
If you are converting to a SkyView or SkyView SE system from an earlier Dynon Avionics
D10/D100 series system, we have written the D10/D100 Series to SkyView Conversion Guide,
which details the changes required to convert between the two product families. It is available
as a downloadable PDF document at http://docs.dynonavionics.com.
Warning
Dynon Avionics’ products incorporate a variety of precise, sensitive electronics. SkyView
products do not contain any field/user-serviceable parts such as fuses. Units found to have
been taken apart may not be eligible for repair under warranty. Additionally, once a Dynon
Avionics unit has been opened, it is not considered airworthy and must be serviced at the
factory.
Dynon Avionics Product Registration
Please take a moment to register your Dynon Avionics SkyView Classic / SkyView SE / SkyView
HDX system at http://register.dynonavionics.com. Registering your product with Dynon
Avionics ensures that your contact information is up-to-date. This helps verify product
ownership, can expedite warranty claims, and allows us to notify you in the event a service
bulletin is published for your product. You can also optionally sign up to receive other Dynon
Avionics news and product announcements. Dynon Avionics will not share your contact
information with third parties or send you announcements without your explicit consent.
To Next Page
Loading...
