SkyView Display Installation and Configuration
SkyView System Installation Guide - Revision AA 20-5
Because the SV-OAT-340 is optional for the SV-MAG-236, installation instructions are not
included in this section – see SV-OAT-340 Location and Installation in the Beginning in Software
v15.0, SkyView Classic, and SkyView HDX can provide up to ten maintenance reminders based
on Date, elapsed Tach Time, or elapsed Hobbs Time. A maintenance reminder can also be
displayed with no time basis (display text only).
After setup is complete, the Maintenance Log is accessed from the TOOLS > MAINTENANCE
(SkyView Classic) or MENU > MAINT LOG icon (SkyView HDX). For instructions on how to use
the Maintenance Log feature, see the SkyView Classic Pilot’s User Guide, Rev. X and later, or the
SkyView HDX Pilot’s User Guide.
Each item in the maintenance log requires entry of the time basis (or NONE) to determine
whether the item is not yet due, due, or overdue.
SETUP MENU > AIRCRAFT INFORMATION > MAINTENANCE LOG
o > LOG ITEM x
> NAME (user-defined text, up to 14 characters)
> TIME BASIS (NONE | DATE | TACH | HOBBS)
> END TIME, HRS (if TACH or HOBBS was selected)
or…
> END DAY, END MONTH, END YEAR (if DATE was selected)
To Next Page
Loading...
