EDM Solution Ultima 844 - Telco Arming - Call Forward Immediate on; Telco Arming - Call Forward no Answer on; Telco Arming Sequence

146
Solution Ultima 844/862/880 Installation Manual
Telco Arming Sequence
LOCATION 113 – 142
000000000000000000000000000000
These locations allow you to automatically activate call diversion on your telephone when you arm
the system in AWAY Mode.
Upon activating the Telco Arming Sequence when arming the system in AWAY Mode, the control
panel will redirect all calls to your mobile phone, pocket pager or answering service.
Contact your telecommunications provider for more information on Call Forward operations.
Digit Required Number To Program Digit Required Number To Program
Terminator
0
8
8
1
1
9
9
2
2
0
10
3
3
*
11
4
4
#
12
5
5
Four Second Pause
13
6
6
Break
14
7
7
15
15
Table 66: Telco Arm/Disarm Dialling Digits
Telco Arming – Call Forward Immediate On
To turn Call Forward Immediate On:
*21(Phone Number you want calls to go to) #
Example
If you wish to immediately forward all incoming calls to the telephone number 96721055 upon
arming the system in AWAY Mode, you would program the following:
2196721 55 0000000000000000
00
Telco Arming – Call Forward No Answer On
To turn Call Forward No Answer On:
*61(Phone Number you want calls to go to) #
Example
If you wish to forward all incoming calls to the telephone number 96721055 upon arming the system
in AWAY Mode when there is no answer, you would program the following:
6196721 55 0000000000000000
00
ISSUE162.DOC Electronics Design and Manufacturing Pty Limited