Partitioning 239
Audible Indicators
In general, the audible indications given out by the codepad are as follows:
Indicator Definition
One Short Beep
A Button Has Been Pressed On The Codepad Or End
Of Exit Time When Armed In Either STAY Mode 1 Or
STAY Mode 2
Two Short Beeps
The System Has Accepted Your Code
Three Short Beeps
The Requested Function Has Been Executed
One Long Beep
Indicates The End Of Exit Time In AWAY Mode Or
The Requested Operation Has Been Denied Or Aborted
One Short Beep Every Second
Walk Test Mode Is Currently Active Or Warning
Before Automatic Arming Takes Place
One Short Beep Every Two
Seconds
Telephone Monitor Mode Is Active
One Short Beep Every Minute
There Is A System Fault Waiting To Be Acknowledged
Table 154: Audible Indications
Electronics Design and Manufacturing Pty Limited ISSUE162.DOC
To Next Page
Loading...