92 Solution Ultima 844/862/880 Installation Manual
User Code Functions
+ +
Function Description
0
Arm Or Disarm Both Areas At The Same Time (CC488)
0
Table 44: User Code Functions
Arm or Disarm Both Areas At The Same Time
This user code function only operates on Solution Ultima 880 systems that have been partitioned.
The function allows those user codes that are allocated to both Area 1 and Area 2 to arm or disarm
both areas at the same time.
This allows the user to ensure that both areas will be armed or disarmed by pressing one extra button
rather that entering a code twice to ensure both areas are armed or disarmed. This function can be
used to arm both areas at the same time from either the CP5 Area Addressable Codepad (CP500A) or
the Master Partitioned Codepad (CP500P). Refer to Option 2 in “LOCATION 445” on page 242 to
enable this feature.
How To Arm/Disarm Both Areas At The Same Time
1. Enter your followed by 0and the button.
Two beeps will be heard and both areas will be armed or disarmed from AWAY Mode.
+
0
+
ISSUE162.DOC Electronics Design and Manufacturing Pty Limited
To Next Page
Loading...