System Operations 41
Disarming The System From AWAY Mode
When you enter the premises after the system has been armed in AWAY Mode, you will need to
disarm the system from AWAY Mode to disable detection devices that will activate the sirens, strobe
and bell outputs.
If there has been an alarm condition prior to disarming the system from AWAY Mode, a flashing
ZONE indicator will be displayed, indicating a previous alarm on that zone.
How To Disarm The System From AWAY Mode
1. Enter your followed by the button.
Two beeps will be heard and the
AWAY indicator will extinguish.
+
Electronics Design and Manufacturing Pty Limited ISSUE162.DOC
To Next Page
Loading...