72 Solution Ultima 844/862/880 Installation Manual
How To Disable STAY Mode 2 Zones
If at any time you wish to disable all zones selected to be automatically isolated for STAY Mode 2,
you may enter the following sequence.
+
4
+
+
Satellite Siren Service Mode
5
If an EDMSAT is connected to Output 1, this function will allow you to perform service work on the
system without triggering the satellite siren. The satellite siren will return to its normal working state
the next time the system is armed.
How To Enter Satellite Siren Service Mode
1. Enter your followed by 5and the button.
Three beeps will be heard.
+
5
+
ISSUE162.DOC Electronics Design and Manufacturing Pty Limited
To Next Page
Loading...