EDM Solution Ultima 844 - Changing Domestic Phone Numbers

System Functions 81
2
Changing Domestic Phone Numbers
When the system has been set up for domestic dialling, this function allows the Master Code holder to
view and program the required telephone numbers that the system will call in the event of an alarm.
For a more detailed description, refer to Domestic Dialling on page 125 for further information.
How To Change Domestic Phone Numbers
1. Enter your followed by 2and the button.
Three beeps will be heard and the
STAY and AWAY indicators will begin to flash.
If there are telephone numbers already programmed, they will be displayed one digit at a time
via the remote codepad indicators. Refer to "Table 40: Codepad Indicators When Changing
Domestic Telephone Numbers" on page 82 for the indicators and their meanings.
If there are no telephone numbers programmed, a further two beeps will be heard after entering
this mode. These two beeps are normally heard after the last digit of the last phone number has
been displayed.
2. Enter all the digits for
, one digit at a time. You will notice as each digit is entered,
the corresponding codepad indicators will illuminate.
3. If there is more than one telephone number, press the
button followed by the
4 button
after the last digit of the telephone number. This will insert a break between the first telephone
number and the second telephone number. If there is only one phone number, press the
button to exit this mode.
4. Enter all the digits for , one digit at a time. You will notice as each digit is
entered, the corresponding codepad indicators will illuminate.
5. After the last digit of the second telephone number, press the button to exit this mode
unless a third telephone number is required. If there is a third telephone number to be
programmed, press the
button followed by the
4 button to insert a break between the
second telephone number and the third telephone.
+
2
+
+ + +
4
+ +
Digit Required Number To Program Digit Required Number To Program
0
0
8
8
1
1
9
9
2
2
3
3
*
Followed By 1
4
4
#
Followed By 2
5
5
Four Second Pause
Followed By 3
6
6
Break
Followed By 4
7
7
15
Followed By 5
Table 39: Domestic Dialling Digits
Electronics Design and Manufacturing Pty Limited ISSUE162.DOC