Codepad Indicators 35
CP5 Master Partitioned LED Codepad
This codepad is only used on the
Solution Ultima 880 control panel
when partitioned. The Master Partitioned LED codepad will allow the user
to operate both areas individually from the same codepad, without the need
to operate individual areas from separate codepads.
The codepad is the communications interface between you and your alarm
system. The codepad allows you to issue commands and offers both visual
and audible indications that guide you through the general operation.
The codepad incorporates numerous indicators. There are
ZONE indicators
that are used to show the condition of each zone and four others for general
Figure 3: CP5 Master Partitioned LED
status. The following is a list of situations and the relevant indications that
Codepad (CP500P)
will be seen.
Refer to Partitioning on page 235 for more information.
The indicators on the CP5 Master Partitioned LED codepad are configured in to four groups.
Following is a description of what the indicators mean.
Zone Indicators
1
The ZONE indicators are used to display the status of the zones. The following table lists the various
circumstances that the indicators will display (i.e. Zone Sealed, Zone Unsealed).
Indicator Definition
On
Zone Is Unsealed
Off
Zone Is Sealed
Flashing Fast
(0.25 Sec On – 0.25 Sec Off)
Zone Is In Alarm Condition
Flashing Slow
(1 Sec On – 1 Sec Off)
Zone Is Manually Isolated
Table 17: Zone Indicators
Area On/Off Indicators
2
The group of four Area On/Off indicators (1 – 4) show the status of each area (i.e. If an indicator is
illuminated, that area is armed and if the indicator is not illuminated, that area is disarmed).
If an area is armed in STAY Mode 1, the corresponding Area On/Off indicator will be illuminated in
conjunction with the
PARTIAL indicator. If the area is armed in AWAY Mode, only the
corresponding Area On/Off Indicator will be illuminated.
Area On/Off Indicator Definition
On
Area Is Armed In AWAY Mode Or STAY Mode 1
Off
Area Is Disarmed
Table 18: Area On/Off Indicators
Electronics Design and Manufacturing Pty Limited ISSUE162.DOC
To Next Page
Loading...