150 Solution Ultima 844/862/880 Installation Manual
Ring Burst Time
LOCATION 748 - 749 46
Location Description
748
Increments Of 5 ms
749
Increments Of 80 ms
Table 69: Ring Burst Time Locations
(V1.07+)
These locations program the ring burst time (Default = 500 ms). If the duration of
the telephone ring tone is 1.5 seconds, programming the ring burst time more than the
telephone ring duration (1.5 seconds); the control panel will not detect an incoming call.
Always program the ring burst time less than the duration of the ring tone.
These locations are factory set and should not be changed unless required.
ISSUE162.DOC Electronics Design and Manufacturing Pty Limited
To Next Page
Loading...