Frontier LP7700 - Mode structure table; Maintenance

Mode structure table
1/5
3. Mode
31000
31000
Mode structure table
Mode structure table
• SP1: The service personnel password is required to display this.
• SP2: Data can be changed by entering the service personnel password.
!
!!
! Maintenance Application display
!
!!
! Maintenance display
!
!!
! Extension display
!
!!
! Setup
Item Reference
Output Device Registration
Maintenance
☞Maintenance display
Item Reference
Start Up Checks
Close Down Checks
Extension
☞Extension display
Status Display
☞31100
Emulsion Number Change
Daily Setup
Help Display
Debug Mode (SP1)
☞31110
Item Reference
Extension Setup ☞Setup
Processor Settings ☞Processor Settings
Operator Selections
☞Operator Selections
Function and Option Registration
Password Registration
Maintenance
☞Maintenance
Item Reference
Laser Setup Paper Specification Registration/Setup
☞32510
F Print Check →Sample 1/Sample 2 ☞32517
F Black Balance Adjustment
FBlack Balance Initialization
F NCE Mode
☞32513
FTest Print
F Edge Brightness Correction (SP1) ☞32514
F Edge Brightness Correction Data Initialization (SP1)
F Machine-to-machine variation correction
FMachine-to-machine variation correction value
F Exposure Adjustment (SP1)
☞32515
FTest Print
Magazine Registration/Setup ☞32520
Paper Balance Correction
Paper Temperature Correction
Data Initialization (SP1)
☞32550
Initial Setup (SP1)
Distributed by: minilablaser.com