Frontier LP7700 - Self-diagnostic

4/5
3. Mode
31000
31000
Mode structure table
*1. Not in use for F.
Setting ON/OFF for errors related to replenishing or water refilling is not available.
!
!!
! Maintenance
Refilling Water Error
*1
(SP1) If it is set to OFF, the attention message is not shown even though
the refilling water tank runs out of water.
ON
Circulation Pump Error (SP1) If it is set to OFF, the error message is not shown even though the
circulation pumps stop.
ON
Order Classification Section Error (SP1) If it is set to OFF, the attention message is not shown even though
the print full sensor detects paper.
ON
Item Reference
Various Adjustment Colorimeter Calibration ☞Replacing the
calibration plate
Colorimeter Unit Adjustment (SP1)
☞35100
Printer Mechanical Adjustment Paper Sensor Adjustment ☞36000
Paper Guide Width Correction (SP1)
*1
☞36005
Paper Advance Unit Correction (SP1)
☞36010
Exposure Magnification Correction (SP1) ☞36020
Exposure Position Adjustment (SP1) ☞36030
Exposure Magnification Fine Adjustment
(SP1)
☞36040
Paper Advance Length Correction (SP1)
☞36050
Arm Unit 1 Zigzagging Correction
☞36060
Paper Guide Width Adjustment (for each
Paper Width)
*1
☞36065
Exposure Center Correction
☞36070
Exposure Advance Adjustment (SP1) ☞36080
Paper Pressure Operation Correction ☞36090
White Border Width Correction
☞36100
Process Control Strip
Input Check Printer ☞35210
Processor
☞35220
Output Check Printer ☞35310
Processor ☞35320
Reading and Writing Data Reading Data (Media -> CPU)
☞35400
Writing Data (CPU -> Media)
System Version Check Accessories ☞35500
Profile Data (SP1)
Software Upgrade
☞35600
Operation Information Daily Setup History ☞35700
Laser Operation Record (SP1)
Machine Specification (SP2)
☞35800
Self-diagnostic (SP1) Image Path Check ☞35920
Printer I/F Main PCB Self-Diagnostic
☞35930
• ARCNET Self-Diagnostic (details of
modes)
☞35940
• ARCNET Self-Diagnostic (diagnosis)
☞35941
• ARCNET Self-Diagnostic (results) ☞35942
• Laser Self-Diagnostic (details of modes) ☞35950
• Laser Self-Diagnostic (diagnosis: AUTO)
☞35951
Item Details Standard
setting
Distributed by: minilablaser.com