3/7
6. Electrical parts
66007
66007
Description of PCB (printer section)
(1) Write down the Output Device Name shown in Output Device List.
(2) Delete the Output Device shown in Output Device List.
Select Output Device and click Delete.
(3) Click the Find button.
(4) Select this printer from the Connected device list then click >.
NOTE
• Any of the printers is shown at Machine Type Registration. However, you do not have to change the setting
because this will be changed in Step 9.
(5) Select this printer from the Output Device List, and register the name noted in Step (1).
(6) Click Enter.
(7) Click Cancel.
9. Configure the Machine Type Registration, Language, Date of shipment and Communication
Speed Setting settings on the Machine Specification display that were noted before replacing the
printer I/F main PCB in Step 1.
Bringing up the display
Maintenance: 2260 → Extension → Maintenance → Machine Specification
Output Device Registration
Machine Specification (1) Machine Specification (2)
1, 2
3
5
7
6
4
Distributed by: minilablaser.com
To Next Page
Loading...