Note: Use the checklist accompanying each shipment (if applicable) to verify that all items are present with the
shipment.
Step 4
Record the serial number and issue number of the equipment in accordance with local record-keeping
procedures, if necessary.
✓ This task is complete.
Addional Instrucons:
Perform the same procedure for each blade, PIU, or pluggable module (SFP/SFP+/CFP4) being installed.
Equipment Installation
Unpack and Inspect Equipment
105
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only
To Next Page
Loading...
Need help?
General