Fujitsu 1FINITY L100 - Default User Security Settings; User Login and Authentication Log; RADIUS Authentication

Output Example:
umin 3;
pmin 6;
pcontent BASIC;
prot OFF;
smt y;
dural 1;
maxinv 3;
pre-login-banner "Welcome to the FUJITSU 1FINITY\nCopyright Fujitsu Network
Communications";
post-login-banner "NOTICE: THIS IS A PRIVATE COMPUTER SYSTEM. UNAUTHORIZED
ACCESS OR USE MAY LEAD TO PROSECUTION.";
lastlogin n;
warn Not-Settable;
debug n;
authentication-order [ LOCAL ];
[ok]
6.9.3
Default User Security Settings
The following CLI command displays default user security sengs.
Command:
% show security defaults
Output Example:
uage OFF;
page OFF;
minit OFF;
reauth n;
idle-timeout 1800;
[ok]
6.9.4
User Login and Authentication Log
The following CLI command displays entries in the security log le: /var/log/auth.log.
Command:
> request security-log-get num-of-lines <num-of-lines> read-from-linenumber <read-
from-linenumber>
Parameter Value Descripon
num-of-lines
<1, 2, …> Number of lines
read-from-linenumber
<2> Line number to read from
6.9.5
RADIUS Authentication
System Administration
Security Administration
230
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only