Fujitsu 1FINITY L100 - Install Filler Panel

4.16
Install Filler Panel
The following links lead to related informaon:
Remove Filler Panel
Step 1
Locate the PIU slot on the blade that requires the ller panel.
Step 2
Obtain the proper number of ller panels for installaon into unoccupied PIU slots on the blade.
Step 3
Warning: Equipment can be damaged by ESD during installaon, removal, or whenever handled. Ensure
that an appropriate ESD wrist strap is worn and is properly grounded.
Install the ller panel by performing the following substeps:
a) Ensure that the ller panel is oriented properly.
b) Carefully and slowly press the ller panel into the empty PIU slot unl the ller panel is completely inserted.
Note: Filler panels must be installed in any unoccupied slot on the blade.
Equipment Installation
Install Filler Panel
152
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only