Fujitsu 1FINITY L100 - Remove Filler Panel

9.1
Remove Filler Panel
The following links lead to related informaon:
Install Filler Panel
Warning: All unused PIU slots in the blade require a ller panel; otherwise, improper airow may occur
and result in equipment damage.
Step 1
Locate the ller panel to be removed.
Step 2
Press the release latch, and slowly and carefully remove the ller panel using the handle located at the front of
the panel.
Release Lever
s8102az_2
Figure 167
Removing Filler Panel
✓ This task is complete.
Equipment Removal
Remove Filler Panel
424
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only