Fujitsu 1FINITY L100 - Telnet Server Service; Web Server Services

Set SSH Server Port
By default, the SSH server port is set to 22.
Command:
% set system services ssh-server ssh-server-port <22|2000…6021|6023…32767|61001…
65535>
6.14.7
Telnet Server Service
The Telnet server service, if enabled, listens on port 23.
Show Telnet Server Conguraon
Command:
% show system services telnet
Enable/Disable Telnet Server
By default, the Telnet server service is disabled.
Command:
% set system services telnet telnet-enabled <true|false>
6.14.8
Web Server Services
Web server services include HTTP, HTTPS, WebGUI, and REST. HTTP and HTTPS are standard web server services.
WebGUI and REST are 1FINITY-specic web services that make use of the HTTP/HTTPS server services:
■ HTTP service—Provides an insecure web server service with HTTP protocol
■ HTTPS service—Provides a secure web server service with HTTPS protocol
■ WebGUI service—Provides a graphical user interface (through a web browser) for users to interact with and
congure the 1FINITY system
■ REST service—Provides a web service that allows users or soware systems to interact with and congure the
1FINITY system through a YANG-data-model-based REST API
System Administration
System Services
245
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only