Fujitsu 1FINITY L100 User Manual

1.8.6
Pluggable Transceiver Modules
The SFP modules provide the following features:
■ Flexible, recongurable opcal or data interfaces
■ Opcal-to-electrical and electrical-to-opcal signal conversion
■ Incoming opcal signal monitoring and alarm reporng
For more detailed SFP modules informaon, refer to 1FINITY Pluggable Transceiver Modules Reference Guide,
available on the Fujitsu Partners website, hps://partners.fnc.fujitsu.com/documentaon.
1.8.7
Power Specications
The L100 Blades operate at –48 V DC with a maximum current draw of 5 A. The UL fuse/breaker
recommendaon for the L100 Blades is 10 A.
The typical current draw is under 5 A across the input voltage range of the L100 Blades.
The following table describes the power cabling for the L100 Blades.
Table 9
Power Specicaons
Connector Wire Gauge Wire Color
Main A (–48 V DC) 14 to 12 AWG Red
GA (Return A) 14 to 12 AWG Black
Main B (–48 V DC) 14 to 12 AWG Red/white
GB (Return B) 14 to 12 AWG Black/white
FG (Frame Ground) 12 AWG Green/yellow
1.8.8
1FINITY Housing
The 1FINITY Housing can power and support up to six (6) 1FINITY Blades. The power terminals on the Housing
supplies redundant A and B –48 V DC power input feeds to each Blade.
For more detailed Housing specicaon informaon, refer to 1FINITY Housing User Guide, available on the
Fujitsu Partners website, hps://partners.fnc.fujitsu.com/documentaon.
System Description and Engineering
Engineering Specications
60
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only

Fujitsu 1FINITY L100 Specifications

General

Brand	Fujitsu
Model	1FINITY L100
Category	Server
Language	English