Fujitsu 1FINITY L100 - Connect LCN1 to DCN; Identify IP Address Assigned to LCN1 by DHCP

Step 3
Check the candidate conguraon, if desired.
Command:
% show routing routing-instance
Step 4
Save the changes.
Command:
% commit
Step 5
Exit conguraon mode.
Command:
% exit
Connue with the next task.
Connect LCN1 to DCN
Step 6
Connect the LCN1 port to the DCN.
Identify IP Address Assigned to LCN1 by DHCP
Step 7
Change to operaonal mode.
Command:
% exit
Step 8
Show IP address state on LCN1.
Command:
> show interfaces-state interface ip-1/0/0/LCN1 ipv4 address
Output Example:
PREFIX
IP ORIGIN LENGTH
---------------------------------
192.168.229.235 dhcp 24
✓ This task is complete.
Initial System Turn Up
Congure IP Connection to DCN
175
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only