Fujitsu 1FINITY L100 - Load Configuration Using CLI

A.2
Load Conguration Using CLI
In this secon:
A.2.1 Save Conguraon File
A.2.2 Edit TEXT Conguraon File
A.2.1
Save Conguration File
Save the conguraon TEXT le in conguraon mode.
Command:
> run show configuration | save FUJITSU-L100_config.txt
A.2.2
Edit TEXT Conguration File
Add Header—
Load Replace
Edit the conguraon le to add the header for load replace operaon.
Commands:
% load replace FUJITSU-L100_config.txt
% commit
Load Merge
Edit the conguraon le to add the header for load merge operaon.
Commands:
%load merge FUJITSU-L100_config.txt
% commit
Load
Conguration Operation
Load Conguration Using CLI
453
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only