Fujitsu 1FINITY L100 - Interoperability with 1 FINITY L130

1.2.6
Interoperability with 1FINITY L130
From Release 19.1.1, the funconality of interoperability with the L130 Blade is introduced.
Note: If L100 Blade interoperates with L130 Release 19.1.1, only an opcal span with Raman ampliers (1FINITY
L160) is supported.
Note: When L100 Blade interoperates with L130 Blade, the OSNR seng on the L100 must be set to enable.
Otherwise, an outstanding osnrModeMismatch alarm is raised on the L100 Blade.
System Description and Engineering
ROADM Applications
36
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only