Fujitsu 1FINITY L100 - TACACS+ Authentication

Note: For more detailed RADIUS informaon, refer to 1FINITY RADIUS User Guide, available on the Fujitsu
Partners website, hps://partners.fnc.fujitsu.com/documentaon.
Enable/Disable RADIUS Authencaon
Enter the following command.
Command:
% set security systemwide authentication-order
The user is prompted to enter the order in which the 1FINITY device authencates users.
[list] ():
To enable RADIUS authencaon, include RADIUS in the list. To disable RADIUS authencaon, omit RADIUS
from the list. Value LOCAL must appear last in the list.
Command Example (RADIUS enable):
% set security systemwide authentication-order
[list] (LOCAL): RADIUS LOCAL
[ok]
[edit]
% commit
Command Example (RADIUS disable):
% set security systemwide authentication-order
[list] (RADIUS LOCAL): LOCAL
[ok]
[edit]
% commit
Show Authencaon Order
Command:
% show security systemwide authentication-order
6.9.6
TACACS+ Authentication
Note: For more detailed TACACS+ protocol informaon, refer to 1FINITY TACACS+ Protocol User Guide, available
on the Fujitsu Partners website, hps://partners.fnc.fujitsu.com/documentaon.
Enable/Disable TACACS+ Authencaon
Enter the following command.
Command:
% set security systemwide authentication-order
System Administration
Security Administration
231
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only