Fujitsu 1FINITY L100 - Page 232

The user is prompted to enter the order in which the 1FINITY device authencates users.
[list] ():
To enable TACACS+ authencaon, include TACACS in the list. To disable TACACS+ authencaon, omit TACACS
from the list. Value LOCAL must appear last in the list.
Command Example (TACACS+ enable):
% set security systemwide authentication-order
[list] (LOCAL): TACACS LOCAL
[ok]
[edit]
% commit
Command Example (TACACS+ disable):
% set security systemwide authentication-order
[list] (TACACS LOCAL): LOCAL
[ok]
[edit]
% commit
Show Authencaon Order
Command:
% show security systemwide authentication-order
System Administration
Security Administration
232
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only