Step 5
Cancel the rollback mer.
Command:
> request cancel-rollback-timer accept true
Output:
status Cancel Rollback Timer Complete
[ok][2016-01-07 14:29:56]
Step 6
Retrieve the alarms status on the blade.
Command:
> show alarms alarm-list
✓ This task is complete.
8.5.3
Secondary Database via USB Flash Drive
L100 Blade supports secondary database via USB ash drive. The USB ash drive provides secondary storage of
the OSL and database in real me. Secondary storage of the database helps to reduce database corrupon.
Database corrupon is raised when both the primary and secondary databases are corrupted; otherwise, the NE
recovers from the valid database. If the NE detects that the primary database is corrupted, the NE automacally
transfers and recovers the database using the secondary database stored in the USB ash drive. If the NE detects
that the secondary database is corrupted, the Main blade automacally overwrites and backs up the secondary
storage with the primary database.
Note: USB ash drive is supported on the Main blade only (L100 Blade). USB ash drive is not supported for
tributary blades (L100 or L110 Blade).
■ The USB ash drive for secondary database can either be:
• Fujitsu preferred supplier
• User-supplied own USB ash drive
■ Recommended:
• Operang temperature: 0…50 °C
• NAND type: SLC
• Flammability: UL94-V0 or higher
• Regulaons: VCCI/CE/FCC/Class B, RoHS, ESD
System Maintenance
Backup and Restore
417
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only