Prerequisites:
■Clear all alarms and standing condions being reported on the blade.
■The user must be logged on as fujitsu/1nity or have Level-4 or Level-5 privileges assigned to perform this
procedure.
As part of database restore for the secondary database, when a new database is accepted, the CDSF content is
updated. The user does not have access to the CDSF database which is disncve from access to the NE
database. The NE does not back up the CDSF storage as a part of NE database backup procedures to an external
host.
The NE supports non-volale storage of crical data that is disncve from the data stored in the NE provisioning
database. The storage facility used by the CDSF is disnct from the storage used by the NE database to such an
extent that any corrupon of the NE database does not cause a corrupon of the data stored in the CDSF
database.
Step 1
Retrieve the current alarms status on the blade.
Command:
> show alarms alarm-list
Step 2
Transfer the database to the /var/ftp directory of the blade.
Command:
> request transfer ftp action download local-file-path /var/ftp/1FINITY-XXXXXX.dbs
remote-file-path ftp://anonymous:anonymous@192.168.1.2/1FINITY-XXXXXX.dbs
Step 3
Restore the database.
Command:
> request db-restore filename 1FINITY-XXXXXX.dbs sysNameCheck true
Output:
status database Restore Complete from /var/ftp/1FINITY-071716.dbs
[ok][2016-07-20 14:23:26]
Step 4
Acvate the database.
Command:
> request db-activate rollBackTimer 00-20-00
Output:
status database Activate Complete
[ok][2016-01-07 14:26:26]
Note: The blade restarts when a new database is acvated.
System Maintenance
Backup and Restore
416
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only