Fujitsu 1FINITY L100 User Manual

6.2
About CLI
In this secon:
6.2.1 CLI Operaonal Mode
6.2.2 CLI Conguraon Mode
6.2.3 CLI Command Prompts
6.2.4 User Guide CLI Command Prompt Convenon
6.2.5 CLI User Permissions
6.2.6 CLI Command Compleon
6.2.7 CLI Command Comments
6.2.8 CLI Messages
The CLI provides a mechanism for users to enter commands that congure and manage the NE and perform
operaons, administrave, and maintenance tasks on the NE. The CLI is rendered using data models dened in
YANG modules. The CLI is hierarchical, which means that the conguraon commands have nested layers.
CLI provides two command modes: operaonal mode and conguraon mode.
Note: For more detailed CLI informaon, refer to 1FINITY CLI User Guide, available on the Fujitsu Partners
website, hps://partners.fnc.fujitsu.com/documentaon.
6.2.1
CLI Operational Mode
Operaonal mode is the inial mode aer successful logon to the CLI. It is primarily used for viewing the system
status, controlling the CLI environment, monitoring and troubleshoong network connecvity, and iniang the
conguraon mode.
When the CLI session is in the operaonal mode, the command prompt terminates with the ">" character.
Command Example:
fujitsu@fujitsu>
Key operaonal mode commands are show and request.
Operaonal Mode Commands
Command Descripon
clear Clear parameter
commit Conrm a pending command
compare Compare running conguraon to another conguraon or a le
congure Manipulate soware conguraon informaon
describe Display transparent command informaon
exit Exit the management session
System Administration
About CLI
204
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only

Fujitsu 1FINITY L100 Specifications

General

Brand	Fujitsu
Model	1FINITY L100
Category	Server
Language	English