Fujitsu 1FINITY L100 - Set ROADM Constraints

5.16
Set ROADM Constraints
Step 1
Set ROADM constraints.
Command:
% set roadm-constraints equipment-port-group contention-gr-1 ports 3/1/0/C1
3/1/0/C2 3/1/0/C3 3/1/0/C4 3/1/0/C5 3/1/0/C6 3/1/0/C7 3/1/0/C8 3/1/0/C9 3/1/0/C10
3/1/0/C11 3/1/0/C12 3/1/0/C13 3/1/0/C14 3/1/0/C15
3/1/0/C16
✓ This task is complete.
Initial System Turn Up
Set ROADM Constraints
200
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only