Fujitsu 1FINITY L100 User Manual

6.8
CLI Session Administration
In this secon:
6.8.1 Enable/Disable CLI Complete-on-Space
6.8.2 Change Idle Timeout
6.8.3 Force Logo
6.8.1
Enable/Disable CLI Complete-on-Space
Hint: Seng complete-on-space to true can speed up the CLI session.
Any user can enable and disable the complete-on-space seng for their current CLI session. At the start of
every CLI session, complete-on-space is set to false, which means CLI command compleon is only
triggered by the <tab> key. If the user wants the <space> key to trigger CLI command compleon, set
complete-on-space to true using the following CLI command.
Command:
% set complete-on-space <true|false>
6.8.2
Change Idle Timeout
Users are automacally logged o the system if the session is idle longer than idle-meout seconds. Users can
change the value of idle-meout for the current session using the following CLI command.
Command:
% set idle-timeout <0…8192>
6.8.3
Force Logoff
Level-4 or Level-6 privileges are required to perform this command.
The following CLI command terminates all CLI sessions for user <username>.
Command:
> request system logout user <username>
System Administration
CLI Session Administration
228
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only

Fujitsu 1FINITY L100 Specifications

General

Brand	Fujitsu
Model	1FINITY L100
Category	Server
Language	English