EasyManua.ls Logo

Fujitsu 1FINITY L100 - Firmwareversionmismatch; Forwarddefectindication

Fujitsu 1FINITY L100
473 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
rmwareVersionMismatch
Enty Type Severity
Service
Aected
Direcon Locaon Descripon
BDL1-3B11, BDL1-3R11 minor service-
aecng
n/a NEND Firmware Version Mismatch: TYPE = <unit
type>
Probable Cause Suggested Correcve Acon
The FW on the tributary blade specied in
the alarm is not compable with the system
soware.
Perform the FW upgrade procedure on the indicated blade.
BDL1-3B11, BDL1-3R11 major service-
aecng
n/a NEND Firmware Version Mismatch: TYPE = <unit
type>
Probable Cause Suggested Correcve Acon
The FW on the tributary blade specied in
the alarm is not compable with the system
soware.
Perform the FW upgrade procedure on the indicated blade.
forwardDefectIndication
Enty Type Severity
Service
Aected
Direcon Locaon Descripon
och warning service-
aecng
receive NEND Forward Defect Indicaon
Probable Cause Suggested Correcve Acon
An OCH signal failure, for example, a WDM
LOS, has occurred in the upstream direcon.
Clear the upstream WDM transmit signal failure.
Cauon: The OSC must be acve for trac to be restored.
A failure of the OSC may keep trac from recovering on a
span.
System Maintenance
Trouble Clearing
313
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only

Table of Contents

Related product manuals