Fujitsu 1FINITY L100 - ROADM Turn-Up and Operations

7
ROADM Turn-Up and Operations
In this chapter:
7.1 Enable Flexible Grid
7.2 Enable OSNR for Main Blade
7.3 Provision Raman Port Connecons
7.4 Provision L100 Main Blade OTS/OMS/OCH Interfaces
7.5 Set 100 Mb/s OSC Power Pad
7.6 Provision Direct Access (Colorless) Channels
7.7 Provision L110 Tributary Blade OCH Interfaces
7.8 Link PIL1-3PS2 Client Port to Transponder/
Muxponder Edge Port
7.9 Provision Add/Drop Port Connecons
7.10 Provision Cross-Connects
7.11 Adding Degree to ROADM Node
7.12 Adding L110 Blade to ROADM
7.13 Adding Raman Blade to ROADM Node
7.14 Provision L100 Blade for FLASHWAVE 9500
Interoperability
7.15 Reprovision L100 Blade for FLASHWAVE 9500
Interoperability
7.16 Interoperability with L130 Blade
ROADM Turn-Up and Operations
253
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only