1.5
Management Interfaces
In this secon:
1.5.1 Command Line Interface
1.5.2 WebGUI
1.5.3 Virtuora NC
1.5.1
Command Line Interface
Command Line Interface (CLI) provides a mechanism for users to enter commands that congure and manage
the NE and perform operaons, administrave, and maintenance tasks on the NE. The CLI is rendered using data
models dened in YANG modules. The CLI is hierarchical, which means that the conguraon commands have
nested layers. CLI uses the SSH
®
server service.
Note: Refer to About CLI for more informaon.
Note: For more detailed CLI informaon, refer to 1FINITY CLI User Guide, available on the Fujitsu Partners
website, hps://partners.fnc.fujitsu.com/documentaon.
1.5.2
WebGUI
Similar to the CLI, the WebGUI provides users with an interface to congure and manage the NE. However, the
WebGUI user interface is graphical, rather than command line. The WebGUI is supported through web browsers,
including Microso
®
Internet Explorer
®
, Mozilla
®
Firefox
®
, Google Chrome
™
, and Safari
®
. The WebGUI is
designed to work on Android
™
mobile and IPad Air
™
, IPad mini
™
, and IPad Pro
™
mobile digital devices.
Note: The WebGUI does not provide the same level of operaon support as CLI or NETCONF. Fujitsu
recommends to use CLI or NETCONF for provisioning and status collecon.
Note: For more detailed WebGUI informaon, refer to 1FINITY WebGUI User Guide, available on the Fujitsu
Partners website, hps://partners.fnc.fujitsu.com/documentaon.
1.5.3
Virtuora NC
Virtuora
®
NC is Fujitsu general soware plaorm for SDN/NFV-based network management and service delivery.
Although Virtuora NC is designed for much more, it includes graphical user interface that operators can use to
congure, monitor, and manage 1FINITY NEs in a tradional (non-SDN) fashion.
System Description and Engineering
Management Interfaces
48
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only
To Next Page
Loading...
Need help?
General