Fujitsu 1FINITY L100 User Manual

6.1
Default Settings and IP Port Information
The following table lists IP port ranges for 1FINITY product management interfaces, protocols, and services.
Note: The values shown in bold are default values.
Management Interface/
Protocol/Service
Port Range
SSH 22, 2000…65535
Telnet 23
FTP 21
SFTP 2000…2202…65535
Webserver-HTTP 80, 2000…65535
Webserver-HTTPS 443, 2000…65535
NETCONF/SSH 830, 2000…65535
CLI Uses SSH
WebGUI Uses HTTP/HTTPS
REST Uses HTTP/HTTPS
NTP 123
SNMP 161, 2000…65535
The following table shows default values for CLI/SSH, NETCONF, and Web server parameters.
Management Interface/
Protocol/Service
Default value
cli-ssh-port 22
netconf-enabled true
netconf-meout 30m
netconf-ssh-port 830
webserver-hp-port 80
webserver-meout 30m
webserver-hp-enabled false
The following table shows maximum number of individual sessions supported.
System Administration
Default Settings and IP Port Information
202
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only

Fujitsu 1FINITY L100 Specifications

General

Brand	Fujitsu
Model	1FINITY L100
Category	Server
Language	English