Fujitsu 1FINITY L100 - C-Band Fequencies and Wavelengths

1.8.9
C-Band Fequencies and Wavelengths
The standard 96-channel C-Band frequencies and wavelengths, with a 50-GHz grid, for the L100 Blades and PIUs
are shown in Frequency Wavelength.
Note: The channel and frequency values are not restricted to the values are shown in Frequency Wavelength.
For example, channel 1 can be assigned a center frequency of 196.10 THz with a slot width of 50 GHz and
channel 96 can be assigned a center frequency of 196.05 THz with a slot width of 50 GHz. The channel and
frequency values shown in the table are used to prevent a trac hit during a soware and Firmware (FW)
upgrade.
Note: The L100 Blades support exible grid.
System Description and Engineering
Engineering Specications
61
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only