Fujitsu 1FINITY L100 User Manual

Show FTP Server Conguraon
Command:
% show system services ftp ftp-server
Enable/Disable FTP Server
By default, the FTP server service is disabled.
Command:
% set system services ftp ftp-server ftp-server-enabled <true|false>
6.14.3
NETCONF Service
Note: For more detailed NETCONF informaon, refer to 1FINITY NETCONF Protocol User Guide, available on the
Fujitsu Partners website, hps://partners.fnc.fujitsu.com/documentaon.
Show NETCONF Service Conguraon
Command:
% show system services netconf
Enable/Disable NETCONF
By default, the NETCONF service is enabled.
Command:
% set system services netconf netconf-enabled <true|false>
Set NETCONF Port
By default, the NETCONF service port is set to 830.
Command:
% set system services netconf netconf-port <830|2000…6021|6023…32767|61001…65535>
Set NETCONF Timeout
By default, the NETCONF meout is set to 30 minutes.
Command:
% set system services netconf netconf-timeout <nYnMnDnHnMnS>
6.14.4
SFTP Server Service
System Administration
System Services
242
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only

Fujitsu 1FINITY L100 Specifications

General

Brand	Fujitsu
Model	1FINITY L100
Category	Server
Language	English