Fujitsu 1FINITY L100 - Syslog Administration

6.10
Syslog Administration
The 1FINITY NEs support syslog ltering, saving syslogs to local syslog les, and sending syslogs to the remote
syslog server. The ltering can be done based on facility and severity. When the ltered syslogs are saved locally,
a maximum of four such les can be created.
Note: For more detailed syslog informaon, refer to 1FINITY Syslog User Guide, available on the Fujitsu Partners
website, hps://partners.fnc.fujitsu.com/documentaon.
Display Syslog
Command:
> request syslog-get num-of-lines <#lines> read-from-linenumber <starting-line-
number>
This command displays the contents of the syslog log /var/log/syslog.
Clear/Reset Syslog
Command:
> request clear-syslog
This command deletes the contents of the syslog log /var/log/syslog.
Check Local Syslog Filtering
Command:
% show syslog actions file log-file
Congure Local Syslog Filtering
Command:
% set syslog actions file log-file <log-file-name> log-selector log-facility <log-
facility-selection> severity <severity-selection>
This command captures user logon/logo events to a local syslog le on disk.
Delete Local Syslog Filtering
Command:
% delete syslog actions file log-file <log-file-name>
Check Remote Syslog Filtering
Command:
% show syslog actions remote
System Administration
Syslog Administration
233
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only