Fujitsu 1FINITY L100 User Manual

softwareReset
Enty Type Severity
Service
Aected
Direcon Locaon Descripon
BDL1-3B11, BDL1-3R11 minor non–service-
aecng
n/a NEND Soware Reset: TYPE=<unit type>
Probable Cause Suggested Correcve Acon
A system soware reset is in progress. No acon is required. This alarm clears when the system
soware reset completes.
softwareStageInProgress
Enty Type Severity
Service
Aected
Direcon Locaon Descripon
BDL1-3B11, BDL1-3R11 major, non-
alarmed
non–service-
aecng
n/a NEND Soware Stage In Progress
Probable Cause Suggested Correcve Acon
Soware staging is in progress. No acon is required. The alarm automacally clears when
soware staging completes.
softwareVersionMismatch
Enty Type Severity
Service
Aected
Direcon Locaon Descripon
COM major non–service-
aecng
n/a NEND Soware Version Mismatch
Probable Cause Suggested Correcve Acon
A mismatch failure of the le conguraon
among the acve banks has occurred.
1. In a new turn-up, perform a WARM reset.
2. If the installed blade contains the desired soware and
database, call Fujitsu for technical assistance at 1-800-
USE-FTAC (1-800-873-3822).
3. Download the latest release of soware to all blades,
and switch to the new load. If any problems exist, call
Fujitsu for technical assistance at 1-800-USE-FTAC
(1-800-873-3822).
System Maintenance
Trouble Clearing
333
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only

Fujitsu 1FINITY L100 Specifications

General

Brand	Fujitsu
Model	1FINITY L100
Category	Server
Language	English