Fujitsu 1FINITY L100 - Logon from NE to Remote Host

6.17
Logon from NE to Remote Host
In this secon:
6.17.1 Telnet Client Session
6.17.2 SSH Client Session
6.17.1
Telnet Client Session
This command creates a Telnet session from the 1FINITY node (the Telnet client) to a Telnet server host.
Command:
> telnet host <host-address> port <port number> user <username>
Parameter Value Descripon
host-address
<1xx.xxx.xxx.xxx> Hostname or IP address
port number
23 Port number
username
<user 1, user 2> Username for logging on to the remote host
6.17.2
SSH Client Session
Open SSH Client Session
Command:
> ssh host <host-address> port <port number> user <username>
Parameter Value Descripon
host-address
<1xx.xxx.xxx.xxx> Hostname or IP address
port number
22 Port number
username
<user 1, user 2> Username for logging on to the remote host
Remove SSH Server Key Entry
This command removes the SSH key from the 1FINITY node (the SSH client) that was given to it by an SSH server
host.
Command:
> ssh-key-remove -host <hostname or IP address>
System Administration
Logon from NE to Remote Host
252
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only