Fujitsu 1FINITY L100 User Manual

5.1
Log On
This procedure describes how to log on to the blade.
Note: The blade ships with a default username and password of fujitsu/1nity. The defaults are used in the
procedures in this manual.
Note: Fujitsu recommends changing the default username aer logging on for the rst me.
Note: Wait 10 minutes aer powered up to log on the system.
Step 1
Using a LAN cable, connect the PC to the blade connector labeled LMP. The IP address of the LMP is
192.168.1.1/30. The PC must have an IP address of 192.168.1.2/30.
Step 2
From the PC, open an SSH client session to the NE using the LMP IP address (192.168.1.1).
Note: Some SSH clients (for example, TeraTerm) provide an opon to the user to choose an authencaon
method. In such a scenario, select the Use keyboard-interacve to log in opon buon and click OK.
Figure 86
Use keyboard-interacve to log in Opon Buon
Step Result:
A command line window displays a logon command line.
Initial System Turn Up
Log On
160
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only

Fujitsu 1FINITY L100 Specifications

General

Brand	Fujitsu
Model	1FINITY L100
Category	Server
Language	English