Fujitsu 1FINITY L100 - CLI User Permissions; CLI Command Completion

Note: For 1FINITY NEs, the hostname is the value of system name. (Refer to System Name.)
6.2.5
CLI User Permissions
Certain commands require Level-4 (root/superuser) permissions, for example, conguraon and provisioning.
The default username and password (fujitsu/1nity) provide Level-4 permissions that allow access to all
funcons on the system.
6.2.6
CLI Command Completion
Typing the full command or opon name is not required for the CLI to recognize it. To display possible
compleons, type the paral command followed immediately by <tab> or <space> (the laer requires the
complete-on-space opon to be enabled).
If the parally typed command uniquely idenes a command, the full command name appears. Otherwise, a
list of possible compleons is displayed.
Compleon is disabled inside quotes. To enter an argument containing spaces, enclose it with either the
backslash (\) or double quotaon mark (") character.
Command compleon applies to lenames and directories. Space compleon is disabled when entering a
lename.
The following examples illustrate how command compleon works.
Example 1
The user enters com followed by <tab> or <space>.
Command:
> com
The system displays two possible compleons.
Example:
> com
Possible completions:
commit - Confirm a pending commit
compare - Compare running configuration to another configuration or a file
System Administration
About CLI
208
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only