Fujitsu 1FINITY L100 - Interoperability with FLASHWAVE 9500

1.2.5
Interoperability with FLASHWAVE 9500
From 1FINITY L100 Release 2.4, interoperability with the FLASHWAVE
®
9500 Mul-Haul ROADM is supported on
an opcal span. 1FINITY L100 ROADM interoperability is compable with FLASHWAVE 9500 Release 9.4. The
following opcal span conguraons between the 1FINITY L100 ROADM and the FLASHWAVE 9500 Mul-Haul
ROADM are supported:
1FINITY L100 FLASHWAVE 9500 MH AMP—WMP5-ASC2
1FINITY L100 FLASHWAVE 9500 MH AMP—WMP5-ALC2
1FINITY L100 FLASHWAVE 9500 ILA AMP—WMP5-AES1
1FINITY L100 FLASHWAVE 9500 ILA AMP—WMP5-AEL1
DWDM
100G +
Network
DWDM
10G/100G
Network
▪ Classic WSS & Amps
▪ DCM Compensated
1FINITY
1FINITY
1FINITY
1FINITY
L100
FW9500
Multi-Haul < > L100
FW9500
FW9500
FW9500
FNC000625_Rev_02
Figure 9
L100 ROADM Interoperability with FLASHWAVE 9500 Mul-Haul ROADM
Note: In the preceding gure, 1FINITY refers to L100 or L200 Blade.
System Description and Engineering
ROADM Applications
35
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only