Note: By default, the idle me-out period for CLI session is 30 minutes. Use set idle-timeout command
to set the me-out period.
Output:
fujitsu login: fujitsu
Password:
fujitsu:~$ cli
NOTICE: THIS IS A PRIVATE COMPUTER SYSTEM. UNAUTHORIZED ACCESS OR USE MAY LEAD TO
PROSECUTION.
fujitsu connected from 1xx.xxx.xxx.xxx using console on fujitsu
fujitsu@fujitsu>conf
Entering configuration mode private
Current configuration users:
fujitsu ssh (cli from 1xx.xxx.xxx.xxx) on since 2017-07-17 01:13:55 private mode
autop-sys console (noaaa from 1xx.xxx.xxx.xxx) on since 2017-07-17 01:10:35
private mode
[ok][2017-07-17 01:21:05]
Step 5
If appropriate for the task, change to CLI congure mode.
Command:
> configure
Output:
Entering configuration mode
[ok][date-time]
✓ This task is complete.
Initial System Turn Up
CONSOLE Port (Serial Port)
167
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only
To Next Page
Loading...
