Fujitsu 1FINITY L100 - Page 278

Step 3
Provision port-connecon between Raman client port and L100 edge port.
Command:
% set port-connection D1-RAMAN src-shelf 101 src-slot 0 src-subslot 0 src-port C1
dst-shelf 1 dst-slot 0 dst-subslot 0 dst-port E1
✓ This task is complete.
ROADM Turn-Up and Operations
Adding Raman Blade to ROADM Node
278
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only